The floor or the surface to be polished must be perfectly clean without the presence of foreign substances; it is advisable to wash the surface to be treated before applying the polishing powder then start polishing. The average powder that can be used in 1 m2 (10 ft2) can be between 15 grams (0.032 pounds) and 30 grams (0.073 pounds), so the judge is the operator. Wet the polishing pad and the powder with a jet of water to obtain a homogeneous mixture of powder, keep the polishing powder under the polishing pad and start polishing with continuous rotary movements on a recommended surface not exceeding 2.5 m2 (25/30 ft2) With the friction of rubbed with the floor, the water evaporates and you have to wet the surface to avoid the complete evaporation of the liquid, when it moistens the surface check if you have reached the level of polishing wanted, if you need to repeat the operation until the best polishing is achieved, drying the surface in which it works highlights the polishing obtained and if the desired quality has been achieved, it is advisable to thoroughly wash the polished surface with water and then apply a protective product for marble to maintain the result obtained.
NOTES:
the amount of polishing powder that we are writing on this technical sheet is indicative and based on the tests carried out at our factory, the right amount of polishing powder needed to polish 2.5 m2 (27 ft2) of marble floor is only a discretion of the operator, who with regard to the type of material is polished, only the operator can control the right amount of powder to be used.
TIPS ON TREATMENT
It is possible to obtain the best result of polishing with polishing machines for the traditional manual, capable of developing the necessary friction to apply the polishing powder. A polishing finished the duration of the treated surface it depends only wear from foot traffic of the floor, for further protection and maintenance of the polished surface, it is recommended that a small application of protective wax for floors at least every 10 days. Before applying the protective wax is recommended to treat a small corner of the floor to see the result that you can get.